Hello, Welcome To DAWNING TRADING Official Website！
Stainless Steel Tactile Indicator Single Stud with Yellow Carborundum insert.
The Safety Xpress TGSI hazard warning stainless steel single stud tactile is suitable for for indoors and outdoors, commercial carparks, footpaths, shopping centres etc in areas to warn the vision impaired of such warnings as:
Life threatening hazards where serious falls may occur, such as at railway platforms, wharves, vehicular driveways and exits from car parks, etc, which intersect access paths.
To indicate that a point of importance has been reached such as the location of a bus sign or tram stop or the location of a change of direction on a pedestrian crossing island associated with a slip lane crossing.
At the top and bottom of stairways and ramps.
At pedestrian crossings to indicate the path of travel.
Easily installed (no glue required) using 8mm drill bit in conjunction with the nylon plug supplied.
Specifications:
| SKU | STUDSSCAY |
| Description: | Stainless Steel Single Studs with yellow carborundum insert |
| Material: | 316 Marine Grade Stainless Steel w/ Carborundum Insert |
| Colour: | Silver w/ Yellow Insert |
| Shaft Length: | 15mm |
| Plug Length: | 25mm |
| Drill Size | Install using 8MM Drill bit - nylon plug supplied (no glue required) |
| Drill Size: | Use single studs template as a guide, work out where you want holes drilled. Drill holes with a 8mm Drill bit, fit nylon plug into hole then gently tap studs into holes (no glue required). |
| Installation Method: | 1. Use a template to mark where you want holes drilled 2. Drill holes using a 8mm Drill bit (no glue required), fit nylon plug into hole 3. Gently tap single studs into holes |
| Diameter: | 35mm (dome) |
| Height: | 5mm (dome) |
| Compliance: | Manufactured to AS/NZS 1428.4.1:2009 |
